2025-04-13

Correction code 1405020101 FRT NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the RH front door and lower the RH front window.
  2. Move the RH front seat backward.
  3. Release the magnets (x2) and the datums (x2) that attach the RH cabin carpet cover to the driver footwell hush panel.
  4. Release the clips that attach the driver footwell cover to the vehicle.
  5. Disconnect the electrical harness from the puddle light connector, and then remove the driver footwell hush panel from the vehicle.

Install

  1. Connect the electrical harness to the puddle light connector.
  2. Install the clips that attach the driver footwell hush panel to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Align the air vent with the grill.
  3. Install the magnets (x2) and the datums (x2) that attach the RH cabin carpet cover to the driver footwell hush panel.
  4. Move the RH front seat back to its original position.
  5. Raise the RH front window and close the RH front door.