2026-04-20

Correction code 1309011501 1309011502 FRT NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-01-26: Released new procedure.

Remove

  1. Open the liftgate.
  2. Remove the trunk load floor from the vehicle.
  3. Pull the seatback covers (x2) away and upward to release the location hooks (x4) and clips (x8).

Install

  1. Secure the location hooks (x4) and clips (x8), then push the seatback covers (x2) into place.
  2. Install the trunk load floor onto the vehicle.
  3. Close the liftgate.