2026-04-20

NV36 Seats - 3rd Row Seat Assemblies and Hardware - 3rd Row Seat Assemblies - 3rd Row Headrest - RH (RI)

Correction code 1306010501 1306010502 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components.
  • 2026-01-27: Released new procedure.
  1. Open all four doors
  2. Open liftgate
  3. Remove 3rd row RH headrest
    Informational PurposesAn informational icon, calling your attention
    Note
    Simultaneously depress the guide button and insert a 90 degree pick into the guide opening, Lift up while engaged
  4. Install 3rd row RH headrest
    Informational PurposesAn informational icon, calling your attention
    Note
    Depress adjustment guides during installation
  5. Close liftgate
  6. Close all four doors
    Informational PurposesAn informational icon, calling your attention
    Note
    If LV is powered up then unlatch rear doors before closing