2025-06-10

Hinge Pivot - LH - Applique - Fabric Tonneau (Long Range) (Remove and Install)

Correction code NEW NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
  • 2025-05-12: Released new procedure.
  1. Open tailgate
    Informational PurposesAn informational icon, calling your attention
    Note
    Press button to release
  2. Remove tonneau upper applique
    Informational PurposesAn informational icon, calling your attention
    Note
    4x bolts, T25, 10Nm, Release lower bolts, Pivot applique upwards, Release pivot bolts, Remove applique
  3. Remove LH tonneau applique hinge pivot
    Informational PurposesAn informational icon, calling your attention
    Note
    1x bolt, T25, 10Nm
  4. Install LH tonneau applique hinge pivot
    Informational PurposesAn informational icon, calling your attention
    Note
    1x bolt, T25, 10Nm
  5. Install tonneau upper applique
    Informational PurposesAn informational icon, calling your attention
    Note
    4x bolts, T25, 10Nm, Install pivot bolts, Pivot applique downwards, Install lower bolts,
  6. Close tailgate