Correction code NA NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

1. Open tonneau cover
   Note

   Press forward arrow on LH bed rail

   

2. Open tailgate
   Note

   Press button to release

   

3. Remove RH sail applique
   Note

   17x clips, 1x datum, Carefully remove RH sail applique from body

   

   

4. Inspect RH sail applique
   Note

   17x clips, 1x datum, Inspect for missing clips, Replace missing clips, Replace sail applique if any of the clip towers are broken or missing, Sail applique can only be removed and reinstalled 5 times before it must be replaced due to damage to the clips, If there are already 4 or more marks on the underside of the applique, replace sail applique

   

   

   

5. Install RH sail applique
   Note

   17x clips, 1x datum, Verify the forward most clips are present and seated correctly Align RH sail applique into position, Ensure all clips are properly secured onto body, Failure to secure clips could result in part ejection

   

   

   

   

   

6. Close tailgate

   

7. Close tonneau cover