Windshield and Backlite - Header Seal, LH (Remove and Install)
Correction code 1020133051 1020133052 1020133061 1020133062 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH B-pillar applique. See Exterior Trim Fittings - B-Pillar Applique - LH (Remove and Install).
-
Remove the LH header seal from the
roof rail trim.
Install
-
Install the LH header seal onto the
roof rail trim.
- Install the LH B-pillar applique. See Exterior Trim Fittings - B-Pillar Applique - LH (Remove and Install).