15/01/2025 15:01:33

Steering Column and Wheel - Steering Wheel Switch Bezel (Remove and Replace)

Correction code NA NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Cybertruck electronics are powered by a 48V "mid voltage" or "MV" architecture that is designed to improve efficiency. Servicing MV components requires extra knowledge and care in order to avoid personal and/or vehicular harm. Read and understand MV precautions in Electrical Precautions and make sure any required MV-related training courses have been completed, as applicable.

Remove

  1. Remove the steering wheel assembly. See Steering Column and Wheel - Steering Wheel Pur Heated (Remove and Install).
  2. Remove steering wheel horn plate assembly
    Informational PurposesAn informational icon, calling your attention
    Note
    4x bolts, T30, 4 Nm, 1x spade connector
  3. Remove the steering wheel upper shroud. See Steering Column and Wheel - Shroud Upper - Steering Wheel.
  4. Remove the LH steering wheel switch. See Steering Column and Wheel - Steering Wheel Switch - LH (Remove and Install).
  5. Remove the RH steering wheel switch. See Steering Column and Wheel - Steering Wheel Switch - RH (Remove and Install).
  6. Remove steering wheel switch bezel
    Informational PurposesAn informational icon, calling your attention
    Note
    2x brackets, Release connector housings from brackets

Install

  1. Position steering wheel switch bezel
    Informational PurposesAn informational icon, calling your attention
    Note
    2x brackets, Secure connector housings onto brackets
  2. Install the RH steering wheel switch. See Steering Column and Wheel - Steering Wheel Switch - RH (Remove and Install).
  3. Install the LH steering wheel switch. See Steering Column and Wheel - Steering Wheel Switch - LH (Remove and Install).
  4. Install the steering wheel upper shroud. See Steering Column and Wheel - Shroud Upper - Steering Wheel.
  5. Install steering wheel horn plate assembly
    Informational PurposesAn informational icon, calling your attention
    Note
    4x bolts, T30, 4 Nm, 1x spade connector
  6. Install the steering wheel assembly. See Steering Column and Wheel - Steering Wheel Pur Heated (Remove and Install).