23/07/2024 17:29:49

Front Grille and Applique - Front Lower Grille (Remove and Install)

Correction code 1001052071 FRT 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Remove the front lower fascia. See Front Bumper Fascia - Front Fascia (Remove and Install).
  2. Release the fascia harness from the lower grille assembly.
  3. Remove the bolts (x4) that attach the lower grille assembly to the fascia.
    NaN Nm (NaN lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 8 mm socket
  4. Release the retaining tabs (x8) that attach the lower grille assembly to the fascia, and then remove the grille assembly from the fascia.

Install

  1. Position the lower grille assembly to the fascia, and then secure the retaining tabs (x8) that attach the grille assembly to the fascia.
  2. Install the bolts (x4) that attach the lower grille assembly to the fascia.
    NaN Nm (NaN lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 8 mm socket
  3. Install the fascia harness to the lower grille assembly.
  4. Install the front lower fascia. See Front Bumper Fascia - Front Fascia (Remove and Install).