23/07/2024 17:26:38
Center Console - Airwave Assembly (Remove and Install)
Correction code 1519023091 1519023092 FRT 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
Remove
-
Follow the steps to remove the rear display and airwave assembly, and then remove the
airwave assembly from the rear display. See Touchscreen - Rear Display (Remove and Install).
Install
- Follow the steps to install the rear display and airwave assembly. See Touchscreen - Rear Display (Remove and Install).