30/10/2024 15:14:37
Windshield Washer Bottle and Pump - Washer Tank Neck (Remove and Replace)
Correction code NEW NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
Remove
- Remove the frunk assembly. See Frunk Assembly (Remove and Install).
-
Remove the washer tank neck.
Install
-
Install the washer tank neck.
- Install the frunk assembly. See Frunk Assembly (Remove and Install).