Cap - Tank - Washer - Windshield (Remove and Install)
Correction code
1750020121,
1750020122
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and FRT
listed above reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times
to learn more about FRTs and how they are created.
NOTE: See Personal Protection
to make sure you are wearing proper PPE when performing the procedure
below.
NOTE:
See Ergonomic Precautions for
safe and healthy working practices.
Remove
- Open the powered frunk.
-
Remove the washer tank cap.
Install
-
Install the washer tank cap.
- Close the powered frunk.