3901 - Front Drive Unit Assembly Front Drive Unit Assembly - Cable, Ground Strap, 35mm2 (Remove and Install) Correction code 3901049031 3901049032 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. Front Drive Unit Assembly - Du Breather Housing (Remove and Install) Correction code 3901049041 3901049042 FRT 1.08 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. Front Drive Unit Assembly - Electric Oil Pump 2.0 Dg (Remove and Install) Correction code 3901049021 3901049022 FRT 0.54 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. Front Drive Unit Assembly - Front Drive Unit (Remove and Install) Correction code 3901049111 FRT 2.46 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. Front Drive Unit Assembly - Front Drive Unit (Remove and Replace) Correction code 3901049112 FRT 2.64 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. Front Drive Unit Assembly - Inverter, Mount, C1PM (Remove and Install) Correction code 3901049101 3901049102 FRT 0.71 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. Front Drive Unit Assembly - Heat Exchanger, C1 (Remove and Install) Correction code 3901049081 3901049082 FRT 1.14 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. Front Drive Unit Assembly - Output Axle Seal, DVI, HNBR 44 X 67 (Remove and Replace) Correction code 3901049011 3901049012 FRT 0.60 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. Front Drive Unit Assembly - Front Drive Unit - Inverter NVH Covers Assembly (Remove and Install)39010490501 39010490502Front Drive Unit Assembly - Front Drive Unit Assembly - Bushing - Side - LH (Remove and Install)39010490901 39010490902Front Drive Unit Assembly - Front Drive Unit Assembly - Gearcase Bushing (Remove and Install)39010490701 39010490702Front Drive Unit Assembly - Front Drive Unit Assembly - Motor Side NVH Covers Assembly (Remove and Install)39010490601 39010490602Parent topic: 39 - FRONT DRIVE UNIT