Steering Column and Wheel - Shroud Lower Instrument Panel - Steering Column (Remove and Install)
Correction code
3205111041
3205111042
FRT
0.71
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the steering wheel. See Steering Column and Wheel - Steering Wheel Pur Heated (Remove and Install).
- Remove the steering column upper shroud. See Steering Column and Wheel - Shroud Upper Instrument Panel - Steering Column (Remove and Install).
-
Remove the screws (x2) that attach the
steering column lower shroud to the steering column, and slide the shroud off the gap
hider to remove it from the vehicle.1.5 Nm (1.1 lbs-ft)TIpUse of the following tool(s) is recommended:
- Torx T20 socket
Install
-
Position the steering column lower shroud to the steering column, slide the shroud
onto the gap hider, and then install the screws (x2) that attach shroud to the steering
column.1.5 Nm (1.1 lbs-ft)TIpUse of the following tool(s) is recommended:
- Torx T20 socket
- Install the steering column upper shroud. See Steering Column and Wheel - Shroud Upper Instrument Panel - Steering Column (Remove and Install).
- Install the steering wheel. See Steering Column and Wheel - Steering Wheel Pur Heated (Remove and Install).