Exterior Trim Fittings - Sail Baffle Closeout - LH (Remove and Install)
Correction code 1220035071 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH sail baffle applique. See Exterior Trim Fittings - Sail Baffle Applique - LH (Remove and Install).
-
Release the clips (x6) that attach the
LH sail baffle closeout to the vehicle, and then remove the closeout from the
vehicle.
Install
-
Position the LH sail baffle closeout
into the vehicle, and then secure the clips (x6) that attach the closeout to the
vehicle.
NoteReplace any missing or damaged clips.
- Install the LH sail baffle applique. See Exterior Trim Fittings - Sail Baffle Applique - LH (Remove and Install).