2026-08-09

False Wall - Bed (Standard) (Remove and Install)

Correction code NEW NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components.
  • 2026-05-08: Released new procedure.
  1. Remov the LH and RH lower bed side wall. See Bed Side Wall - LH (Standard) (Remove and Install).
  2. Remove the bolts (x2) that attach the false wall to the vehicle, and then remove the false wall from the vehicle.
    Note
    Recommended to use assistance to prevent scratching bed liner.
    Note
    15mm, 45 Nm.
  3. With assistance, position the false wall into the vehicle, and then install the bolts (x2) that attach the false wall to the vehicle.
    Note
    Recommended to use assistance to prevent scratching bed liner.
    Note
    15mm, 45 Nm.
  4. Install the LH and RH lower bed side wall. See Bed Side Wall - LH (Standard) (Remove and Install).