2024-07-23

Tweeter - LH (Remove and Install)

Correction code 2121012011 2121012012 FRT 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components.

Install

  1. Position the LH tweeter into the LH upper A-pillar trim, engage the tabs (x3) that attach the tweeter to the trim assembly, and then connect the electrical connector.
    Informational PurposesAn informational icon, calling your attention
    Note
    Push inward to engage the tabs.
  2. Install the LH upper A-pillar trim. See Trim - A-Pillar - Upper - LH (Remove and Install).
  3. Install the LH mid A-pillar trim. See Trim - A-Pillar - Mid - LH (Remove and Install).
  4. Install the front header trim. See Trim - Header - Front (Remove and Install).
  5. Raise the LH front window and close the LH front door.