31/10/2023 14:22:56

Front Bumper Fascia - Front Fascia Lower Dummy LP Cover (Remove and Install)

Correction code 1001046031 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Release the tabs (x3) and datums (x3) that attach the front license plate dummy cover to the vehicle, and then remove the cover from the vehicle.

Install

  1. Position the front license plate dummy cover onto the vehicle, and then secure the tabs (x3) and datums (x3) that attach the cover to the vehicle.