2026-08-13
Windshield Assembly (w/ Off Road Lightbar Partial Remove) (Remove and Replace)
Correction code
NEW
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Warning
This procedure is a DRAFT.
Although it has been validated, Warnings and Cautions might be missing. Follow safety
requirements and use extreme caution when working on or near High Voltage systems and
components.
- 2026-08-13: Released new procedure.
Remove
- Partially remove the off road lightbar from the windshield assembly. See Off Road Lightbar (Remove and Install).
- Remove the windshield assembly from the vehicle. See Windshield Assembly (Remove and Replace).
Replace
- Install the new windshield assembly on the vehicle. See Windshield Assembly (Remove and Replace).
- Install the off road lightbar on the windshield assembly. See Off Road Lightbar (Remove and Install).