10/05/2024 14:27:35

Tailgate Latch and Striker - RH Body - Side Hinge, Tailgate (Remove and Install)

Correction code 1133116071 1133116072 FRT 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Remove the tailgate assembly. See Closure Panels - Assembly - Tailgate (Remove and Install).
  2. Remove the bolts (x2) that attach the RH body side tailgate hinge to the vehicle, and then remove the hinge from the vehicle.
    50 Nm (36.9 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 15 mm socket

Install

  1. Position the RH body side tailgate hinge into the vehicle, and then install the bolts (x2) that attach the hinge to the vehicle.
    50 Nm (36.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    Align the bolt heads to the witness marks before tightening.
    Tip: Use of the following tool(s) is recommended:
    • 15 mm socket
  2. Install the tailgate assembly. See Closure Panels - Assembly - Tailgate (Remove and Install).