2025-06-10

Center Console Assembly (Long Range) (Remove and Install)

Correction code NEW NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
  • 2025-05-12: Released new procedure.
  1. Open LH front door
    Informational PurposesAn informational icon, calling your attention
    Note
    Push LH B-pillar door trigger to release
  2. Lower LH front window
  3. Move LH front seat forward
  4. Open LH rear door
    Informational PurposesAn informational icon, calling your attention
    Note
    Push LH C-pillar door trigger to release
  5. Lower LH rear window
  6. Open RH front door
    Informational PurposesAn informational icon, calling your attention
    Note
    Push RH B-pillar door trigger to release
  7. Lower RH front window
  8. Move RH front seat forward
  9. Open RH rear door
    Informational PurposesAn informational icon, calling your attention
    Note
    Push RH C-pillar door trigger to release
  10. Lower RH rear window
  11. Remove center console back panel
    Informational PurposesAn informational icon, calling your attention
    Note
    10x clips, 3x tabs, 3x connectors
  12. Remove rear bolts securing center console to riser
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, 10mm, 5 Nm
  13. Move RH front seat backward
  14. Remove RH center floor rail
    Informational PurposesAn informational icon, calling your attention
    Note
    4x clips, 3x datums, Pull upwards to release
  15. Move LH front seat backward
  16. Remove LH center floor rail
    Informational PurposesAn informational icon, calling your attention
    Note
    4x clips, 3x datums, Pull upwards to release
  17. Remove center console front panel
    Informational PurposesAn informational icon, calling your attention
    Note
    10x clips
  18. Remove front bolts securing center console to riser
    Informational PurposesAn informational icon, calling your attention
    Note
    4x bolts, 10mm, 5 Nm
  19. Disconnect center console harness connector
    Informational PurposesAn informational icon, calling your attention
    Note
    1x connector
  20. Remove center console
    Informational PurposesAn informational icon, calling your attention
    Note
    Lift up to release from riser, Recommend assistance, Remove towards rear of vehicle
  21. Install center console
    Informational PurposesAn informational icon, calling your attention
    Note
    Lower onto riser, Recommend assistance, Install from rearward direction
  22. Connect center console harness connector
    Informational PurposesAn informational icon, calling your attention
    Note
    1x connector
  23. Install front bolts securing center console to riser
    Informational PurposesAn informational icon, calling your attention
    Note
    4x bolts, 10mm, 5 Nm
  24. Install center console front panel
    Informational PurposesAn informational icon, calling your attention
    Note
    10x clips, Replace any missing or damage clips
  25. Install LH center floor rail
    Informational PurposesAn informational icon, calling your attention
    Note
    4x clips, 3x datums
  26. Move LH front seat forward
  27. Install RH center floor rail
    Informational PurposesAn informational icon, calling your attention
    Note
    4x clips, 3x datums
  28. Move RH front seat forward
  29. Install rear bolts securing center console to riser
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, 10mm, 5 Nm
  30. Install center console rear panel
    Informational PurposesAn informational icon, calling your attention
    Note
    10x clips, 3x connectors, 3x tabs, Replace any missing or damaged clips
  31. Raise RH rear window
  32. Close RH rear door
  33. Move RH front seat to original position
  34. Raise RH front window
  35. Close RH front door
  36. Raise LH rear window
  37. Close LH rear door
  38. Move LH front seat to original position
  39. Raise LH front window
  40. Close LH front door