23/07/2024 17:29:19

Front Door Trim Pad - Door Reflector (Remove and Install)

Correction code 1513047131 1513047132 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the LH front door.
  2. Using a non-marring trim tool, pry from the top of the LH front door reflector to remove it from the door assembly.

Install

  1. Insert the bottom grooves of the LH front door reflector into the door trim, and then push firmly on the reflector to install it into the door assembly.
  2. Close the LH front door.