2024-07-23

Puddle Lamp - Center Console (Remove and Install)

Correction code 1519023011 1519023012 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Move the LH front seat fully rearward.
  3. Remove the center console front panel. See Panel - Front - Center Console (Remove and Install).
  4. Disconnect the center console lamp electrical connector, and then remove the lamp from the center console.

Install

  1. Position the center console lamp into the vehicle, and then connect the electrical connector.
  2. Install the center console front panel. See Panel - Front - Center Console (Remove and Install).
  3. Restore the LH front seat back to its original position.
  4. Raise the LH front window and close the LH front door.