2026-03-09

Panel - Rear - Center Console (Long Range) (Remove and Install)

Correction code 15190405401, 15190405402 0.00 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components.
  • 2025-06-21: Released new procedure.
  1. Open LH front door
    Note
    Push LH B-pillar door trigger to release
  2. Lower LH front window
  3. Move LH front seat forward
  4. Open LH rear door
    Note
    Push LH C-pillar door trigger to release
  5. Lower LH rear window
  6. Open RH front door
    Note
    Push RH B-pillar door trigger to release
  7. Lower RH front window
  8. Move RH front seat forward
  9. Open RH rear door
    Note
    Push RH C-pillar door trigger to release
  10. Lower RH rear window
  11. Remove center console back panel
    Note
    10x clips, 3x tabs, 3x connectors
  12. Install center console rear panel
    Note
    10x clips, 3x connectors, 3x tabs, Replace any missing or damaged clips
  13. Raise RH rear window
  14. Close RH rear door
  15. Move RH front seat to original position
  16. Raise RH front window
  17. Close RH front door
  18. Raise LH rear window
  19. Close LH rear door
  20. Move LH front seat to original position
  21. Raise LH front window
  22. Close LH front door