26/04/2024 08:51:22

2nd Row Seat Back Hardware - 2R Seat Armrest Closeout (Remove and Install)

Correction code 1305003111 1305003112 FRT 0.96 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Remove the LH 2nd row seat back assembly. See 2nd Row Seat Assemblies - 2nd Row Seat Back Assembly - LH (Remove and Install).
  2. Remove the RH mid A-pillar trim. See A-B-C Positivet Interior Trim - A-Pillar Mid Trim - LH (Remove and Install).
  3. Remove the RH upper A-pillar trim. See A-B-C Positivet Interior Trim - A-Pillar Upper Trim - LH (Remove and Install).
  4. Remove the RH cantrail trim. See Headliner Trim - Cantrail Trim - LH (Remove and Install).
  5. Release the clip that attaches the rear of the RH lower C-pillar trim.
  6. Remove the RH upper C-pillar trim. See A-B-C Positivet Interior Trim - C-Pillar Upper Trim - LH (Remove and Install).
  7. Release the clips (x7) and datum that attach the RH 2nd row shoulder cover to the vehicle, and then remove the cover from the vehicle.
  8. Remove the RH 2nd row seat back outboard bolster. See 2nd Row Seat Assemblies - 2R Seat Side Bolster LH (Remove and Install).
  9. Remove the RH 2nd row seat back inboard bolster. See 2nd Row Seat Assemblies - 2R Seat Back Inboard Bolster LH (Remove and Install).
  10. Remove the RH 2nd row seat back assembly. See 2nd Row Seat Assemblies - 2nd Row Seat Back Assembly - LH (Remove and Install).
  11. Remove the 2nd row seat back lumbar. See 2nd Row Seat Back Hardware - 2R Seat Back Lumbar (Remove and Install).
  12. Lift the 2nd row armrest closeout upwards to release it, and then remove the closeout from the vehicle.

Install

  1. Position the 2nd row armrest closeout into the vehicle and behind the armrest.
  2. Install the 2nd row seat back lumbar. See 2nd Row Seat Back Hardware - 2R Seat Back Lumbar (Remove and Install).
  3. Install the RH 2nd row seat back assembly. See 2nd Row Seat Assemblies - 2nd Row Seat Back Assembly - LH (Remove and Install).
  4. Install the RH 2nd row seat back outboard bolster. See 2nd Row Seat Assemblies - 2R Seat Side Bolster LH (Remove and Install).
  5. Install the RH 2nd row seat back inboard bolster. See 2nd Row Seat Assemblies - 2R Seat Back Inboard Bolster LH (Remove and Install).
  6. Position the RH 2nd row shoulder cover into the vehicle, and then engage the clips (x7) and datum that attach the cover to the vehicle.
  7. Install the RH upper C-pillar trim. See A-B-C Positivet Interior Trim - C-Pillar Upper Trim - LH (Remove and Install).
  8. Install the RH lower C-pillar trim.
  9. Install the RH cantrail trim. See Headliner Trim - Cantrail Trim - LH (Remove and Install).
  10. Install the RH upper A-pillar trim. See A-B-C Positivet Interior Trim - A-Pillar Upper Trim - LH (Remove and Install).
  11. Install the RH mid A-pillar trim. See A-B-C Positivet Interior Trim - A-Pillar Mid Trim - LH (Remove and Install).
  12. Install the RH 2nd row seat back assembly. See 2nd Row Seat Assemblies - 2nd Row Seat Back Assembly - LH (Remove and Install).
  13. Reconnect MV power. See Disconnect MV Power.
  14. Install the rear underhood apron. See Underhood Trim - Rear Apron Assembly (Remove and Install).
  15. Restore the LH front seat back to its original position.
  16. Install the LH upper A-pillar trim. See A-B-C Positivet Interior Trim - A-Pillar Upper Trim - LH (Remove and Install).
  17. Install the LH mid A-pillar trim. See A-B-C Positivet Interior Trim - A-Pillar Mid Trim - LH (Remove and Install).
  18. Install the front header trim. See Headliner Trim - Front Header Trim (Remove and Install).
  19. Raise all the windows and close all the doors.