23/07/2024 17:30:21

Front Seat Sliders and Controllers - 1R Nyc Track Cover (Remove and Install)

Correction code 1301061031 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Move the LH front seat fully rearward.
  3. Slide the seat track cover forward to release it from the seat track, and then remove the track cover from the seat track.
    Informational PurposesAn informational icon, calling your attention
    Note
    Gently pry with a trim tool as needed.

Install

  1. Position the seat track cover onto the seat track, and then slide the cover rearward to secure it to the seat track.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the cover is fully seated.
  2. Restore the LH front seat back to its original position.
  3. Raise the LH front window and close the LH front door.