16/05/2024 09:51:28

Tailgate Latch and Striker - Cable Strap, Tailgate (Remove and Install)

Correction code 1133116031 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Open the tailgate.
  3. Release spring clip, and then release the LH cable strap from the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Pull the spring back then slide up to release.
  4. Remove the bolt that attaches the LH tailgate cable strap to the tailgate, and then remove the strap from the tailgate.
    28 Nm (20.6 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    The bolt is captive.
    Tip: Use of the following tool(s) is recommended:
    • Torx T40 socket

Install

  1. Position the LH tailgate cable strap to the tailgate, and then install the bolt that attaches the strap to the tailgate.
    28 Nm (20.6 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    Note
    The bolt is captive.
    Tip: Use of the following tool(s) is recommended:
    • Torx T40 socket
  2. Secure the LH tailgate cable strap to body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Align to the mounting boss, and then slide down to engage spring clip.
  3. Close the tailgate.
  4. Raise the LH front window and close the LH front door.