2026-08-09

FM/HD Tuner (Remove and Install)

Correction code 2135011031 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components.

Remove

  1. Remove the front headliner trim. See Trim - Header - Front (Remove and Install).
  2. Release the locking tabs and disconnect the electrical connectors (x3) from the FM/HD tuner, and then remove the bolts (x2) that attach the tuner to the vehicle.
    8 Nm (5.9 lbs-ft)
    Tip
    Use of the following tool(s) is recommended:
    • 10 mm socket

Install

  1. Position the FM/HD tuner into the vehicle, install the bolts (x2) that attach the tuner to the vehicle, and then connect the electrical connectors (x3) and engage the locking tabs.
    8 Nm (5.9 lbs-ft)
    Tip
    Use of the following tool(s) is recommended:
    • 10 mm socket
  2. Install the front headliner trim. See Trim - Header - Front (Remove and Install).