23/07/2024 17:32:01

Interior Ducting and Vents - Side Window Demist Duct - LH (Remove and Install)

Correction code 1405077011 1405077012 FRT 0.60 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Remove the LH quarter glass demist duct. See Passenger Ducting and Vents - Quarter Glass Demist Duct, LH (Remove and Install).
  2. Remove the clip that attaches the LH side window demist duct to the driver demist duct assembly, and then separate duct assemblies.
  3. Remove the LH IP outboard floor duct. See Interior Ducting and Vents - Instrument Panel Floor Duct Outboard - LH (Remove and Install).
  4. Remove the clips (x2) that attach the LH side window demist duct to the vehicle, and then remove the duct from the vehicle.

Install

  1. Position the LH side window demist duct into the vehicle, and then install the clips (x2) that attach the duct to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the duct is seated over the HVAC case correctly to avoid circulation problems.
    Informational PurposesAn informational icon, calling your attention
    Note
    Refer to the images for install clarification.
  2. Position the LH outboard IP floor duct into the vehicle, and then install the clips (x3) that attach the duct to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure duct is seated over the LH instrument panel floor duct inboard correctly to avoid circulation problems.
    Informational PurposesAn informational icon, calling your attention
    Note
    Refer to the images for install clarification.
  3. Install the clips (x2) that attach the LH side window demist duct to the vehicle.
  4. Join the LH side window demist duct to the driver demist duct assembly, and then install the clip.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the duct is seat over the HVAC case correctly.
  5. Install the LH quarter glass demist duct. See Passenger Ducting and Vents - Quarter Glass Demist Duct, LH (Remove and Install).