2024-07-23

Strut - Bed Cargo Tub (Remove and Install)

Correction code 1120122061 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the tonneau cover.
  2. Open the tailgate.
  3. Open the bed cargo tub lid.
  4. Support the bed cargo tub lid with hood prop.
  5. Remove the clips (x2) that attach the LH bed cargo tub strut to the vehicle, and then remove the strut from the vehicle.

Install

  1. Position the LH bed cargo tub strut into the vehicle, and then install the clips (x2) that attach the strut to the vehicle.
  2. Remove the support from bed cargo tub lid.
  3. Close the bed cargo tub lid.
  4. Close the tonneau cover.
  5. Close the tailgate.