A-B-C Positivet Interior Trim - A-Pillar Lower Trim - LH (Remove and Install)
Correction code 1518006111 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Open the LH front door and lower the LH front window.
- Remove the LH mid A-pillar trim. See A-B-C Positivet Interior Trim - A-Pillar Mid Trim - LH (Remove and Install).
-
Release the clips (x7) and tabs (x2)
that attach the LH lower A-pillar trim to the vehicle, and then remove the trim from the
vehicle.
Tip: Release the sill plate, pull the trim rearward, and then upward to release it.
Install
-
Position the LH lower A-pillar trim
into the vehicle, and then secure the clips (x7) and tabs (x2) that attach the trim to
the vehicle.
- Install the LH mid A-pillar trim. See A-B-C Positivet Interior Trim - A-Pillar Mid Trim - LH (Remove and Install).
- Raise the LH front window and close the LH front door.