23/07/2024 17:23:28
2nd Row Seat Back Hardware - 2R Seat Shoulder Cover Cap (Remove and Install)
Correction code
1305003101
1305003102
FRT
0.36
NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
Remove
- Remove the LH 2nd row seat shoulder cover. See 2nd Row Seat Back Hardware - 2nd Row Seat Shoulder Cover - LH (Remove and Install).
-
Slide the LH 2nd row shoulder cover
cap out of the grooves to release it, and then remove it from the vehicle.
Install
-
Position the LH 2nd row shoulder cover
cap into the vehicle, and then slide the cap into the grooves to secure it.
- Install the LH 2nd row seat shoulder cover. See 2nd Row Seat Back Hardware - 2nd Row Seat Shoulder Cover - LH (Remove and Install).