31/10/2023 14:23:57

Front Seat Control Switches - 1R Seat SW Button Cushion Grey LH (Remove and Install)

Correction code 1301059011 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Move the LH front seat fully forward.
  3. Use a trim tool to release the clips (x3) that attach the LH front cushion button to the seat assembly, and then remove the button from the seat assembly.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Make sure the trim and button are not damaged.
    Informational PurposesAn informational icon, calling your attention
    Note
    Remove the button by twisting with the trim tool.

Install

  1. Position the LH front cushion button onto the LH front seat, and then press the button into the seat to secure the clips (x3).
  2. Restore the LH front seat back to its original position.
  3. Raise the LH front window and close the LH front door.