23/07/2024 17:30:49

Headliner Trim - Front Header Trim (Remove and Install)

Correction code 1520068021 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Release the clips (x19) and magnet that attach the front header trim to the vehicle, disconnect the electrical connector and release the harness clip, and then remove the header trim from the vehicle.

Install

  1. Position the front header trim into the vehicle, connect the electrical connector and secure the harness to the harness clip, and then secure the clips (x19) that attach the header trim to the vehicle.
  2. Raise the LH front window and close the LH front door.