2024-07-23

Cushion Assembly - 2nd Row Seat - LH (Remove and Install)

Correction code 1305002081 1305002082 FRT 0.78 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open all the doors and lower all the windows.
  2. Remove the LH 2nd row seat underbelly. See Underbelly - 2nd Row Seat - LH (Remove and Install).
  3. Remove the clips (x6) that attach the LH 2nd row cushion assembly to the seat frame, and then lift the cushion assembly upwards to remove it from the frame.