2024-11-06

Truck Bed Exterior Trim - Sail Applique Assembly - LH (Remove and Install) (Post 11/4/2024)

Correction code NA NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Informational PurposesAn informational icon, calling your attention
Note
This procedure is for vehicles built after November 4th, 2024 with the new version of the sail applique.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the tonneau cover.
  2. Open the tailgate.
  3. Remove LH sail applique
    Informational PurposesAn informational icon, calling your attention
    Note
    17x clips, 1x datum, 1x harness clip, 1x connector, Carefully remove RH sail applique from vehicle

Install

  1. Install LH sail applique
    Informational PurposesAn informational icon, calling your attention
    Note
    17x clips, 1x datum, 1x connector, 1x harness clip, Align LH sail applique into place, Ensure all clips are properly secured onto body
  2. Close the tailgate.
  3. Close the tonneau cover.