2024-07-23

Seal - Bed Cargo Tub (Remove and Install)

Correction code 1215014051 1215014052 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Open the tonneau cover.
  2. Open the tailgate.
  3. Open the bed cargo tub lid.
  4. Release the clips (x29) that attach the bed cargo tub seal to the cargo tub lid, and then remove the seal from the vehicle.

Install

  1. Align the clips (x29) on the cargo tub seal to the holes on the cargo tub lid, and then secure the clips.
  2. Close the bed cargo tub lid.
  3. Close the tailgate.
  4. Close the tonneau cover.