2024-07-23
Lamp - License Plate (Remove and Install)
Correction code
1740115011
1740115012
FRT
0.18
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Warning
This procedure is a DRAFT.
Although it has been validated, Warnings and Cautions might be missing. Follow safety
requirements and use extreme caution when working on or near High Voltage systems and
components.
Remove
- Remove the tailgate inner cover. See Cover - Inner - Tailgate (Remove and Install).
-
Press the tab to release the license
plate lamp, and then push the lamp outward to remove it.
Install
-
Position the license plate lamp into
the vehicle, and then push the lamp inwards until the tab engages.
- Install the tailgate inner cover. See Cover - Inner - Tailgate (Remove and Install).