23/07/2024 17:29:02

Front and Rear Garnish - Rear Fender Flare Fore - LH (Remove and Install)

Correction code 1220043031 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Release the clips (x12) and tabs (x9) that attach the LH rear fore fender flare to the vehicle, and then remove the fender flare from the vehicle.

Install

  1. Position the LH rear fore fender flare to the vehicle, and then secure the clips (x12) and tabs (x9) that attach the fender flare to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Replace any damaged or missing clips.