2026-03-16

Trim - A-Pillar - Forward - LH (Remove and Install)

Correction code 1518006171 1518006172 1518006181 1518006182 FRT 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-03-16: Added step to remove the IP quarter panel.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Remove the front header trim. See Trim - Header - Front (Remove and Install).
  3. Remove the LH mid A-pillar trim. See Trim - A-Pillar - Mid - LH (Remove and Install).
  4. Remove the LH IP quarter panel. See Quarter Panel Assembly - LH - Instrument Panel (Remove and Replace).
  5. Remove the LH upper A-pillar trim. See Trim - A-Pillar - Upper - LH (Remove and Install).
  6. Release the clips (x4) and locators (x3) that attach the LH A-pillar forward trim to the A-pillar, and then remove the trim from the vehicle.

Install

  1. Position the LH A-pillar forward trim to the A-pillar, and then secure the clips (x4) and locators (x3) that attach the trim to the A-pillar.
  2. Install the LH upper A-pillar trim. See Trim - A-Pillar - Upper - LH (Remove and Install).
  3. Install the LH IP quarter panel. See Quarter Panel Assembly - LH - Instrument Panel (Remove and Replace).
  4. Install the LH mid A-pillar trim. See Trim - A-Pillar - Mid - LH (Remove and Install).
  5. Install the front header trim. See Trim - Header - Front (Remove and Install).
  6. Raise the LH front window and close the LH front door.