2025-03-17

Nozzle - Windshield Washer (Adjust)

Correction code 17501300 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Procedure

  1. Adjust the position of the windshield washer nozzles (x2).
    Informational PurposesAn informational icon, calling your attention
    Note
    Aim the nozzles to the reference points shown in the images. The underhood storage unit is open for demonstration purposes only. The tapes on the windshield is also for demonstration purposes only.
  2. Operate the washers briefly to check the aim of the washer nozzles.
  3. Using a 90 degree miniature pick, adjust the nozzles if necessary.
    Informational PurposesAn informational icon, calling your attention
    Note
    The drive rails need to be ON.