05/03/2021 10:05:28

Carpet - 3rd Row (Remove and Replace)

Correction code 15308102 0.54 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the LH 2nd row seat assembly. See Seat Assembly - 2nd Row - LH (7-Seat) (Remove and Replace).
  2. Remove the RH 2nd row seat assembly. See Seat Assembly - 2nd Row - RH (7-Seat) (Remove and Replace).
  3. Remove the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Remove and Replace).
  4. Remove the LH and RH seat cushion bolsters. See Bolster - Seat Cushion - 3rd Row - LH (Remove and Replace).
  5. Release the clip that attaches the 3rd row carpet to the LH support bracket.
  6. Using a retractable blade, cut a thin straight line in the 3rd row carpet from the LH seat belt opening to the edge of the carpet.
  7. Remove the 3rd row carpet from under the LH trunk side trim.
  8. Release the clip that attaches the RH body harness to the body.
  9. Using a retractable blade, cut a thin straight line in the 3rd row carpet from the RH seat belt opening to the edge of the carpet.
  10. Remove the 3rd row carpet from under the RH trunk side trim.
  11. Remove the 3rd row carpet from the vehicle.

Install

  1. Using a retractable blade, cut a thin straight line on the 3rd row carpet from LH seat belt opening to the edge of the carpet. Repeat this step for the RH side.
  2. Install the 3rd row carpet into the vehicle.
  3. Install the 3rd row carpet under the RH trunk side trim.
  4. Install the clip that attaches the RH body harness to the body.
  5. Install the 3rd row carpet under the LH trunk side trim.
  6. Install the clip that attaches the 3rd row carpet to the LH support bracket.
  7. Install the LH and RH seat cushion bolsters. See Bolster - Seat Cushion - 3rd Row - LH (Remove and Replace).
  8. Install the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Remove and Replace).
  9. Install the RH 2nd row seat assembly. See Seat Assembly - 2nd Row - RH (7-Seat) (Remove and Replace).
  10. Install the LH 2nd row seat assembly. See Seat Assembly - 2nd Row - LH (7-Seat) (Remove and Replace).