26/08/2021 22:07:47
Diamond Cover - Seat Side - 1st Row - LH (Remove and Replace)
Correction code
13072402
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the drive seat inboard side shield. See Side Shield - Outboard - Driver Seat (Remove and Replace)
-
Use the clip tool to
sperate the diamond cover from seat frame, rotate clockwise and remove it
from the LH front seat.
Install
- Install the diamond cover from the LH front seat.
- Install the drive seat outboard side shield. See Side Shield - Outboard - Driver Seat (Remove and Replace)