22/11/2023 21:32:04

Underhood Apron - Rear (Remove and Replace)

Correction code 12251102 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 2023-11-23: Update to keep the first responder loop label from visible to not visible after installation.

Remove

  1. Open the hood.
  2. Release the clips (x14) that attach the rear underhood apron to the vehicle, and then remove the apron from the vehicle.

Install

Installation procedure is the reverse of removal, except for the following:

  • If equipped, ensure the first responder loop label is not visible after installing the rear apron.