17/05/2024 03:17:39
Speaker - Liftgate - LH (Remove and Replace)
Correction code 21213002 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| Screws that attach the liftgate speaker to the liftgate |
 1.8 Nm (1.3 lbs-ft) |
|
Reuse |
Remove
- Remove the liftgate upper trim. See Trim - Upper - Liftgate (Remove and Replace)
- Remove the liftgate speaker grille. See Grille - Speaker - Liftgate - LH (Remove and Replace).
- Disconnect the electrical connector from the liftgate speaker.
-
Remove the screws that
attach the liftgate speaker to the liftgate trim, and then remove the
liftgate speaker from the liftgate trim.1.8 Nm (1.3 lbs-ft)
Install
Installation procedure is the reverse of removal.