17/10/2022 10:20:06
Tweeter - Front Door - LH (with Tether) (Remove and Replace)
Correction code 21212722 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH front door tweeter assembly from the door. See Tweeter Assembly - Front Door - LH (with Tether) (Remove and Replace).
-
Release the clips (x4) that attach the LH tweeter cover to the tweeter carrier assembly, and then separate the cover from the carrier.
-
Release the clips (x3) that attach the LH front door tweeter to the carrier assembly, guide the tether through the guide, and then remove the tweeter from the carrier.
NoteTake note of the original routing for the tether strap.
-
Release the tether from the LH front door tweeter.
NoteTake note of the original routing.
Install
-
Secure the tether to the LH front door tweeter with the same routing noted during removal.
-
Position the LH front door tweeter onto the tweeter carrier, route the tether into the carrier, and then secure the clips (x3) that attach the tweeter to the carrier.
NoteVerify all clips are engaged.
-
Position the tweeter carrier assembly onto the tweeter cover, and then secure the clips (x4) that attach the cover assembly to the carrier.
NoteVerify the assembly is fully seated.
- Install the LH front door tweeter assembly. See Tweeter Assembly - Front Door - LH (with Tether) (Remove and Replace).