Liner - Cup Holder - Seat - 3rd Row (Remove and Replace)
    
    Correction code
    
                           13092012
                           0.06
                           
        
          NOTE: Unless otherwise explicitly
          stated in the procedure, the above correction code and FRT reflect all of the work
          required to perform this procedure, including the linked procedures. Do not stack correction codes unless
            explicitly told to do so.
        
          NOTE: See Flat Rate
            Times to learn more about FRTs and how they are created. To provide feedback on
          FRT values, email ServiceManualFeedback@tesla.com. 
        
          NOTE: See Personal Protection to make sure wearing proper PPE when
          performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
      
                        
  
Remove
- Remove the 3rd row seat cup holder closeout. See Closeout - Cup Holder - Seat - 3rd Row (Remove and Replace).
 - 
          Release the tabs that attach the 3rd row seat up holder liner to the 3rd
                        row seat cushion, and then remove the liner from the vehicle.
          
 
Install
Installation procedure is the reverse of removal.