05/03/2020 10:42:25

Trim - Upper - Liftgate (Remove and Replace)

Correction code 15111002 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the liftgate.
  2. Release the clips (x15), datums (x2), and tabs (x2) that attach the liftgate upper trim to the liftgate, and then remove the trim from the vehicle.
    Tip: Release the side clips first and the upper clips last.

Install

Installation procedure is the reverse of removal, except for the following:

  • If reusing the same liftgate upper trim, install new clips onto the trim.