14/03/2024 01:55:55

Trim - Liftgate - Lower (Remove and Replace)

Correction code 15111302 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 2023-08-31: Updated the cover image and steps.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

Remove

  1. Remove the liftgate upper trim. See Trim - Upper - Liftgate (Remove and Replace).
  2. Release the push clips (x2), clips (x12), and locating pins (x6) that attach the liftgate lower trim to the liftgate.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Remove the mentioned components mentioned in sequence.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    When removing the last clip, use one hand to support the trim to prevent it from suddenly falling and damaging the connector.
  3. Disconnect the connector (x1) at the left lower corner that attaches the liftgate lower trim to the liftgate.

Install

  1. Connect the connector (x1) at the left lower corner that attaches the liftgate lower trim to the liftgate.
  2. Install the locating pins (x6), clips (x12) and push clips (x2) that attach the liftgate lower trim to the liftgate.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Install the mentioned components in sequence.
    Informational PurposesAn informational icon, calling your attention
    Note
    Check the clips before installation, and replace any damaged clips.
  3. Install the liftgate upper trim. See Trim - Upper - Liftgate (Remove and Replace).