Manual Release - Door - Rear - LH (Actuate)
Correction code
11358005
0.05
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
Open Rear Door Using Manual Release Cable
- Remove the mat from the map pocket in the door panel.
-
Use your fingernail or a small flat-bladed tool to open the plastic flap.
-
Pull the mechanical release cable (insulating foam) to release the door latch.
NoteIf the insulating foam releases or is damaged, replace it to avoid potential NVH issues.