2021-03-03

Closeout - Cup Holder - Seat - 3rd Row (Remove and Replace)

Correction code 13092022 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the LH front door and fully lower the LH front window.
  2. Move the driver seat fully forward.
  3. Move the LH 2nd row seat into easy entry mode.
  4. Starting from the front, release the clips that attach the 3rd row cup holder closeout to the seat cushion assembly, and then release the guide tabs.
  5. Remove the 3rd row seat cup holder closeout from the vehicle.

Install

  1. Position the 3rd row seat cup holder closeout into the vehicle.
  2. Install the guide tabs first, and then install the clips that attach the 3rd row cup holder closeout to the seat cushion assembly.
  3. Move the LH 2nd row seat into the original position.
  4. Move the driver seat to the original position.
  5. Raise the LH front window and close the LH front door.